Study Conditions
°C
°C
Metering stroke cannot be negative.
V/P switchover point cannot be negative.
×
Enter an intensification ratio greater than 0.
Live Study Summary
Valid points
—
Injection speed
—
Injection time
—
Average pressure
—
Relative viscosity
—
Enter measurement data to begin the study.
Viscosity Study Measurements
Swipe or scroll horizontally to see all measurement columns
| # | Injection speed | Injection time | Pressure shot 1 | Pressure shot 2 | Pressure shot 3 | Average pressure | Relative shear rate | Relative viscosity |
|---|
Relative Viscosity Curve
Add at least two complete measurement points to display the curve.
Stable Viscosity Region
%
Enter a threshold from 0.1 to 100%.
Maximum relative viscosity change allowed between consecutive points.
Automatically detected region
—
Min
Enter a minimum speed greater than 0.
Max
Enter a maximum speed greater than 0 and not lower than the minimum.
Engineer-selected operating range. It is compared with the detected stable region when both use the same unit.
Enter the engineer-selected injection speed range after reviewing the curve.
Additional Comments
Formula & Detailed Calculation
Relative shear rate
\[
\dot{\gamma}_{rel}
=
\frac{1}{t_{inj}}
\]
Relative viscosity
\[
\eta_{rel}
=
P_{avg}
\times
t_{inj}
\]