Process inputs
cm²
Enter a projected area greater than 0.
Area of the molded part(s) and runner system projected onto the mold parting plane.
pcs
Enter a whole number of cavities (1 or more).
Total projected area = projected area per cavity × number of cavities.
—
Waiting for input
bar
Enter a cavity pressure greater than 0.
Pressure acting over the projected area. The material ranges are carried over from the original calculator dataset as reference guidance.
×
Enter a safety factor greater than 0.
A safety factor below 1.00 provides no positive clamp-force margin.
Applied to the calculated opening force to obtain the recommended clamping force.
Live results
Total projected area
—
Opening force before safety factor
—
Recommended clamping force
—
kN
—
Enter projected area and cavity pressure to calculate clamping force.
How this calculation works
Projected area → Pressure → Opening force → Safety factor → Clamping force
1. Determine total projected area
Enter a projected area to see the calculation.
2. Convert pressure × area into opening force
\[F_{open}=A_{proj}\times p\times0.01\]
With area in cm² and pressure in bar, the factor 0.01 converts the result directly to kN.
—
3. Apply the safety factor
\[F_{clamp}=F_{open}\times S\]
—
4. Convert kN to metric tons-force
\[F_{tf}=\frac{F_{kN}}{9.80665}\]
—
Pressure guidance
Select a material and enter a cavity pressure to compare it with the reference range from the original calculator.